Recording Type - Saadat Dena 640 User Manual

Recording Type

Manual Recording
Press Mode key on the screen or the control panel to toggle between Manual 1+1, Manual 3,
Manual 3+1 and Manual 6.
Press the Start/Stop key on the control panel to start recording. The recording will continue until you
press this key again.
Press Lead► and ◄Lead keys to switch lead (lead group) during the recording. Note that you can
only record the selected lead (s).
■ Manual 1+1: Select this mode and press Lead► and ◄Lead keys to choose between leads. Then
press the Start/Stop key to start recording.
In the recording paper, the first waveform indicates the waveform of selected lead and the second one
is the waveform of selected Rhythm lead.
■ Manual 3: Select this mode and press Lead► and ◄Lead keys to choose between lead groups.
Then press the Start/Stop key to start recording.
■ Manual 3+1: Select this mode and press Lead► and ◄Lead keys to choose between lead groups.
Then press the Start/Stop key to start recording.
In the recording paper, the first three waveforms are the waveforms of selected lead groups and the
last one is the waveform of Rhythm lead.
■ Manual 6: Select this mode and press Lead► and ◄Lead keys to choose between lead groups.
Then press the Start/Stop key to start recording.
Lead► and ◄Lead , you can
Note: In all of Manual recording modes, by pressing the
record from next or previous lead/leads.
Note: In Manual modes, after starting the record, it ended only by pressing the
Start/Stop key again
44