Fan Connectors (Fan1/2/3); Wireless Keyboard And Mouse Connector (J3) - Shuttle FT62 Manual

Fan Connectors - FAN1/2/3
E2
The mainboard provides three onboard 12V cooling fan power connectors
to support FAN1(Default System FAN), FAN2, FAN3 cooling fans.
+12V
SENSE
Note :
Both cable wiring and type of plug may vary , which depends on the
fan maker. Keep in mind that the red wire should always be conected
to the +12V header and the black wire to the ground (GND) header.

Wireless Keyboard and Mouse Connector (J3)

E3
Port J3 can be used to connect wireless keyboard and mouse device.
4 piece mini Jumpers must be setted on pin 5-6, 7-8, 9-10 and 11-12 when
this header is not used.
11 9 7 5 3 1
12 10 8 6 4 2
Pin Assignments:
1=VCC
3=GND
5=MSCLK
7=MSDATA
9=KBCLK
11=KBDATA
GND
1
2=VCC
4=KEY
6=MS_CK
8=MS_DT
10=KB_CK
12=KB_DT
- 35 -
FAN1 FAN3
1 1
FAN2
1
Wireless KB/MS
1
J3