Shuttle FT62 Manual page 69

IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
IRQ3/4/5/7/10/11/12/14/15 assigned
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices is compliant with
the original PC AT bus specification; PCI/ISA PnP for devices is compli-
ant with the Plug-and-Play standard whether designed for PCI or ISA
bus architecture.
Ø The choice: PCI Device or Reserved.
PCI/VGA Palette Snoop
It determines whether the MPEG ISA/VESA VGA Cards can work with
PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and PCI/
VGA Card worked, Enable this field. Otherwise, please Disable it.
Ø The choice: Enabled or Disabled.
Assign IRQ For VGA
The item aims at assigning the IRQ line to the VGA on your system.
When enabled, activity from the VGA will awaken the system.
Ø The choice: Disabled or Enabled.
Assign IRQ For USB
The item aims at assigning the IRQ line to the USB on your system.
When enabled, activity from the USB will awaken the system.
Ø The choice: Disabled or Enabled.
PCI Latency Timer <CLK>
Set the PCI Latency Timer.
Ø Min = 0, Max = 255
INT Pin1~4 Assignment
Names the interrupt request(IRQ) line assigned to a device connected to
the PCI interface on your system.
Ø The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
- 65 -