Irda Header (J7); Extended Usb Connector Headers (Usb0, Usb1) - Shuttle FT62 Manual

IrDA Header (J7)

E8
If you have an infrared device, this mainboard can implement IrDA tranfer func-
tion. To enable the IrDA transfer function, follow these steps:
J7
6
4
2
Pin Assignment:
1=NA
3=VCC
5=IrTx
Note : Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Other wise,
incorrect IR connection may do damage to your IR device.
Step1 : Attach the 6-pin infrared device cable to J7.
(Refer to the above diagram for IR pin assignment.)
Step2 : This mainboard support IrDA, or Normal transfer modes.

Extended USB Connector Headers (USB0, USB1)

E9
The headers are used to connect the cable attached to USB connectors which
are mounted on front panel or back panel. But the USB cable is optional at the
time of purchase.
Pins Assignment:
USB1
1=GND
2=GND
3=Data5+ 3=Data4+
4=Data5-
5=VCC
5
3
1
2=KEY
4=GND
6=IrRx
USB0
1=GND
2=GND
4=Data4-
5=VCC
- 38 -
IrDA Header
1
J7
USB1 USB0
1
1
1
2
3
4
5