Step 12 First Time System Boot Up - Shuttle FT62 Manual

Step 12
First Time System Boot Up
To assure the completeness and correctness of your system installation, you
may check the above installation steps once again before you boot up your
system for the first time.
1. Turn on the system power then press "del" to enter BIOS.
Please set "CD-ROM" as the first boot device. Insert the operating system
setup CD disk into CD-ROM. Now you may save & exit the BIOS setup.
System will restart automatically.
2. After restart, just choose start computer with CD-ROM support.
Then the CD disk will bring up continuous message that teach you how to
get your HDD ready for operating system setup such as HDD partition
creation & format.
3. Once the C: disk's format is done, you can begin to install operating
system.
4. Setup the complete operating system according to your OS installation
guide.
- 21 -