Shuttle FT62 Manual page 67

USB Wake up
If you are using a USB KB/MS, you can enable this item to allow a KB/
MS to wake up the system from power saving mode. Set Usb device
wakeup systen from S1/S3.
Ø The choice: Enabled or Disabled.
PS2 Keyboard Wake Up
This item allows you to set the PS2 Keyboard Wake Up function.
Set PS2 Keyboard Wake Up system from S3/S4/S5.
Ø The choice: Disabled, Password, or Hot KEY.
KB Wakeup Password
This item allows you to set the KB Wakeup Password.
Ø Press" Enter" to set Password.
Hot Key Wake Up
This item allows you to set the Hot Key Wake Up.
Ø The choice: Ctrl-F1~Ctrl-F12, or Any KEY.
PS2 Mouse Wake Up
This item allows you to enable or disable the PS2 Mouse Wake Up.
Set PS2 Mouse Wake Up system from S3/S4/S5.
Ø The choice: Disabled or Enabled.
Pwron After PWR-Fail
This item defines if the system will be rebooted after the power fails.
Ø The choice: Off, On, Former-Sts.
RTC Alarm Resume
When this item enabled, your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend mode.
Ø The choice: Disabled or Enabled.
Data (of Month)
This item selects the alarm date.
Ø Key in a DEC number:Min=0, Max=31.
Resume Time (hh:mm:ss)
This item selects the alarm Time.
[hh]
Ø Key in a DEC number:Min=0, Max=23.
[mm/ss]
Ø Key in a DEC number:Min=0, Max=59.
- 63 -