Shuttle FT62 Manual page 4

3
4
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal : 24.576MHz(X4)/ 24.576MHz(X6)/ 25.00MHz(X7)/ 32.768KHz(X2)
Clock Generator: CLK1
(D) Supported Host Peripherals:
Host Peripheral
#1
#2
#3 Maxtor HDD (40 GB)
#4
#5
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
200MHz
200MHz
Product Name
Case
Power Supply
Shuttle Card R/W
Pioneer DVD Player
P4 3.20 GHz
P4 3.20 GHz
Model Name
FT62
PC32B180HR
D740X-6L
PC-12
DVD-116
Close
Open
S/N
N/A
030509011
N/A 3902B975
N/A
AAMS027197WL 3892D029
FCC ID
D33032