Internal Peripherals Connectors; Enhanced Ide Ata Connectors - Shuttle FT62 Manual

F

Internal Peripherals Connectors

Enhanced IDE ATA Connectors

D1
The mainboard features two 40-pin dual-channel IDE device connectors (IDE1/
IDE2) providing support for up to four IDE devices, such as CD-ROM and Hard
Disk Drives (H.D.D.). Moreover, this mainboard comes with one 80-pin ATA
100/66/33 ribbon cable to connect to IDE H.D.D. connection.
Important : Ribbon cables are directional, therefore, make sure to
1
always connect with the red cable stripe on the same
side as pin #1 of the IDE1/IDE2 connector on the
mainboard.
- 33 -
1