Shuttle FT62 Manual page 13

Ø 1 x Clear CMOS button.
Ø 1 x AV & S-Video port.
Ø 1 x DB9 Serial port.
Ø 1 x SPDIF-out port.
Ø 2 x 1394a ports.
Ø 1 x RJ45 LAN port.
Ø 2 x USB 1.1/2.0 ports.
Ø 1 x PS/2 Mouse port.
Ø 1 x PS/2 Keyboard port.
Ø 1 x Bass/Center port.
Ø 1 x Rear-Out port.
Ø 1 x Front-Out port.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 100/66/33 Bus Master Dual-channel IDE ports provide sup-
port to a maximum of four IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to 100/66/33 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Sus-
pend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving
Features controlled by your operating system that supports OS Direct Power
Management (OSPM) functionality.
- System BIOS
Provides licensed Award BIOS V6.0 PG on 4Mb Flash core and supports Green
PC, Desktop Management Interface (DMI).
- Form Factor
System board conforms to Small from factor ATX specification.
Board dimension: 266mm x 170mm.
- Advanced Features
Ø Low EMI - Built in spread spectrum to reduce EMI.
- 9 -