Fan Connectors - Fan1/2/3 Off When Suspend; Wireless Keyboard And Mouse Connector (Jp2) - Shuttle FT20 User Manual

Fan connectors - FAN1/2/3 OFF when suspend

E2
The mainboard provides three onboard 12V cooling fan power connectors
to support FAN1, FAN2 or FAN3 cooling fans.
FANPWM
SPEED_SENSE
+12V
GND
1
Note :
Both cable wiring and type of plug may vary , which depends on the fan
maker. Keep in mind that the red wire should always be connected to
the +12V header and the black wire to the ground (GND) header.

Wireless Keyboard and Mouse connector (JP2)

E3
Port JP2 can be used to connect wireless keyboard and mouse device.
4 mini Jumper must be setted on pin 5-6, 7-8, 9-10 and 11-12 when this
header is not used.
Pin Assignments:
1=VCC
2=VCC
3=GND
4=KEY
5=MS_CLK
6=MS_CLK_IC
7=MS_DAT
8=MS_DAT_IC
9=KB_CLK
10=KB_CLK_IC
11=KB_DAT
12=KB_DAT_IC
FAN1
FAN3
JP2
2
1
4
3
6
5
8
7
10
9
- 34 -
FAN2
1
JP2
Wireless KB/MS