Shuttle FT62 Manual page 59

------ Now CPU Frequency -----
It shows current frequency of CPU Clock.
CPU Clock Ratio
This item allows the user to adjust CPU Clock Ratio.
If CPU is unlocked, item appear.
Ø The Choice: 8X~50X.
CPU FSB Clock
This item allows the user to adjust CPU FSB Clock.
Ø The Choice: Auto, 100MHz, 133MHz, 166MHz, 200MHz.
CPU Over Clock By
Ø The Choice: +0 ~ +15MHz.
CPU Voltage set
This item allows you to set CPU Voltage.
Ø The Choice: Auto, 0.8250V ~ 1.5875V.
Note: Over CPU voltage may damage CPU.
------ Now DDR Frequency -----
It shows current frequency of DDR Clock.
Memory Frequency For
This item allows the user to adjust Memory Frequency.
Ø The Choice: Auto, SYNC, DDR-200, DDR-266, DDR-333
or DDR-400.
DRAM Over Clock By
This item allows the user to fine tuning Memory Clock.
Ø The Choice: 0 ~ 15MHz.
Memory Timing Parameter
The value in this field depends on performance parameters of the installed
memory chips(DRAM). Don't change the value from the factory setting
unless you install new memory that has a different performance rating
than the original DRAMs.
Ø The Choice: Auto or Manual.
- 55 -