Cpu, Chipset And System Fan Connectors (Fan1/2/3); Audio Cd_In Connectors (J4)(Black) / (J6)(White) - Shuttle MT63 Manual

CPU, Chipset and System Fan Connectors - FAN1/2/3
E2
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), Chipset (FAN2), or System (FAN3) cooling fans.
GND +12V FANIO1
Note :
Both cable wiring and type of plug may vary , which depends on the
fan maker. Keep in mind that the red wire should always be conected
to the +12V header and the black wire to the ground (GND) header.

Audio CD_IN Connectors (J4)(Black) / (J6)(White)

E3
Port J4 & J6 are used to attach an audio connector cable from the CD-ROM
drive.
Pin Assignments (J4):
1=CD_IN Left
2=GND
3=GND
4=CD_IN Right
Pin Assignments (J6):
1=GND
2=CD_IN Right
3=GND
4=CD_IN Left
FAN2
1 1
J4 (black) J6 (white)
J4 (black)
1 2 3 4
CD_IN Left CD_IN Right
GND
- 35 -
FAN1
FAN3
J6 (white)
1 2 3 4
GND
CD_IN Left
CD_IN Right GND