Internal Peripherals Connectors Enhanced Ide Ports And Floppy Connectors - Shuttle MK35 User Manual

Internal Peripherals Connectors
F
D1
Enhanced IDE Ports and Floppy Connector
The MK35/MK35N mainboard features two 40-pin dual-channel IDE device
connectors (IDE1/IDE2) providing support to up to four IDE devices, such as CD-
ROM and Hard Disk Drives (H.D.D.). This mainboard also includes one 34-pin
floppy disk controller to accommodate the Floppy Disk Drive (FDD1). More-
over, this mainboard comes with one 80pin ATA133/100/66 ribbon cable to
connect to IDE H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
Important: Ribbon cables are directional, therefore, make sure to always
connect with the red cable stripe on the same side as pin #1
of the IDE1/ IDE2 or FDD1 connector on the mainboard.
- 33 -
IDE1 IDE2