Table of Contents
Advertisement
4
CC-LINK IE TSN CONFIGURATION
4.1
Procedure
Before communication
1
Connect each unit with an Ethernet cable. (Refer to
2
Set the station number using the station number switches on the circuit board of the FR-A8NCG.
(Refer to
page
3
Clear all parameters, then turn the inverter power OFF and ON again.
Registering a profile
1
Start GX Works3.
2
On the menu bar, select [Tool] → [Profile Management] → [Register...].
3
Select a CSP+ file to be registered on the "Register Profile" screen, and click the [Register] button.
NOTE
• A profile is a compressed file (such as *.zip, *.ipar, and *.cspp). Register a profile without decompressing the file.
Creating a project file
1
For information on creating and opening a project, go to [Help] → [GX Works3 Help].
28
CC-LINK IE TSN CONFIGURATION
48.)
Example: 1 (H01)
page
18.)
X16
X1
Advertisement
Table of Contents
