Wiring; Ethernet Cable Connection - Mitsubishi Electric CC-Link IE TSN FR-A8NCG Instruction Manual

3.4

Wiring

This section describes the cable wiring and precautions. For network configuration, cables, and hubs used for the wiring, refer
to page 19 and subsequent pages.
3.4.1

Ethernet cable connection

 Connecting the cable
(1) Turn OFF the inverter power supply.
(2) Remove the front cover.
(3) Check the direction of the Ethernet cable connector.
Insert the connector to the communication connector of
FR-A8NCG until it clicks.
 Disconnecting the cable
(1) Turn OFF the inverter power supply.
(2) Remove the front cover.
(3) Hold down the latch on the Ethernet cable connector, and
pull out the cable while holding the latch.
3
23
WIRING