Table of Contents
Advertisement
Error reset operation selection at inverter fault
An error reset command from communication option can be invalid in the External operation mode or PU operation mode.
Use RY3A for an error reset command from network. (Refer to
Pr.
Name
Communication reset selection/Ready
349
bit status selection/Reset selection when
inverter errors cleared
The same operation is performed regardless of the setting value.
page
55.)
Initial
Setting
value
range
0, 100, 1000,
Error reset is enabled independently of operation mode.
1100
0
1, 101, 1001,
Error reset is enabled only in the network operation mode.
1101
Function
INVERTER SETTING
5
47
Advertisement
Table of Contents
