Mitsubishi Electric CC-Link IE TSN FR-A8NCG Instruction Manual page 32

6
The FR-A800-GN will appear on the screen once it is detected. Click [Close with Reflecting the
Setting] to close the window. (The FR-A800 will appear as the FR-A800-GN when it has the FR-
A8NCG installed.)
 Checking communication
The following table shows the status of the LEDs when communication is established between the programmable controller
and the inverter.
RUN LINK1
ON Blinking


The LED on either LINK1 or LINK2 will blink depending on the port (port 1 or 2) the Ethernet cable is connected to.
LINK2
CC-LINK IE TSN CONFIGURATION
4
1
31