Table of Contents
Advertisement
WARNING
– Input CH1 and CH2 direct (1:1 probe) — CAT III 300 V
– Input CH1 and CH2 via 10:1 probe — CAT III 600 V
– Input CH1 and CH2 via 100:1 probe — CAT III 600 V
CAT I 3540 V
– Meter input — CAT III 600 V, CAT II 1000 V
– Scope input — CAT III 300 V
– Voltage ratings are Vrms (50 – 60 Hz) for AC sine wave and VDC for
DC applications.
– Meter input - From any terminal to earth ground - CAT III 600 Vrms
– Scope input - From any terminal to earth ground - CAT III 300 Vrms
[1] Refer to the respective probe's manual for more information on the specification.
– If the instrument is used in a manner not specified by the manufacturer,
CAUTION
the instrument protection may be impaired.
– Always use a dry cloth to clean the instrument. Do not use ethyl alcohol
or any other volatile liquid.
– It is recommended to use the instrument under ventilated conditions and
in the upright position to ensure adequate airflow at the rear.
– Always cover the DC power inlet and the USB port by closing the lid when
not in use.
6
All manuals and user guides at all-guides.com
Maximum Input Voltages
[1]
Maximum Floating Voltage
[1]
, CAT II 1000 V
[1]
, CAT II 1000 V
Keysight U1610/20A Service Guide
[1]
[1]
,
Advertisement
Table of Contents
