Table of Contents
Advertisement
– Plug the probe or test leads to the instrument before connecting to any
WARNING
active circuit for testing. Before disconnecting from the instrument,
remove the probe or test leads from the active circuit.
– Do not connect the USB cable when not in use. Keep the USB cable away
from any probe, test lead, or exposed circuitry.
– Do not expose the circuit or operate the instrument without its cover or
while power is being supplied.
– Do not use exposed metal BNC or banana plug connectors. Use only the
insulated voltage probes, test leads, and adapters supplied with the
instrument.
– Do not supply any voltage when measuring resistance or capacitance in
multimeter mode.
– Do not operate the instrument if it does not operate properly. Have the
instrument inspected by qualified service personnel.
– Do not operate the instrument in wet or damp environments.
– Do not operate the instrument in any environment at risk of explosion. Do
not operate the instrument in the presence of flammable gases or flames.
– Keep the instrument surface clean and dry. Keep the BNC connectors dry
especially during high-voltage testing.
Keysight U1610/20A Service Guide
All manuals and user guides at all-guides.com
5
Advertisement
Table of Contents
