Cleaning The Condenser - Perlick HC Series Installation & Operation Manual

Single Door Undercounter Refrigeration Installation & Operation Manual
Cleaning the Cabinet Interior/Exterior
NEVER use hydrochloric
CAUTION
acid (muriatic acid) on
stainless steel. Do not use abrasive cleansers
on cloths on any interior or exterior surfaces,
including removable parts.
Glass panels may be cleaned using any standard
glass cleaner available on the market.
To clean interior and exterior non-metallic surfaces
and removable parts, wash with mild solution of soap
and lukewarm water with a little baking soda. Rinse
and dry thoroughly. Avoid getting water on the lights,
controllers, fan motors and unfinished wood wine
rack faces.
Job
Routine cleaning
Fingerprints and smears
Stubborn stains and discolorations
Heat tint or heavy discoloration
Tenacious deposits, rust, discoloration,
industrial atmospheric stains
Rust dicoloration or corrosion caused by
cleaning agents containing hydrochloric
(muriatic) acid or chlorine bleach
Use of property names is intended only to indicate a type of cleaner and does not constitute an endorsement. Omission of any
proprietary cleaner does not imply its inadequacy. All products should be used in strict accordance with instructions on the package.
NOTE: Do NOT use steel wool or scouring pads to clean stainless steel.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Recommended Cleaners for Specific Situations
Soap, ammonia, detergent
Areal 20, Lac-O-Nu, Lumin Wash, O-Cedar
Cream Polish
AllChem Concentrated Cleaner, Samae,
Twinkle, Cameo Copper Cleaners, Grade
FFF Italian Pumice Whiting, Steel Bright,
Lumin Cleaner, Zud Restoro, Sta-Clean,
Highlite Cooper's Stainless Steel Cleaner
or Revere Stainless Steel Cleaner
Old Dutch, Lighthouse Sunbrite, Wyandotte
Bab-O, Gold Dust, Sapollo, Bon Ami or
Comet
Liquid NuSteel or Dubois Temp
Penny-Brite, Copper Brite, Paste Nu-Steel,
Dubois Temp or Tarnite
Bar Keepers Friend, Revere Stainless
Steel Cleaner, Allen Polish, Steel Bright
Wyandotte Bab-O or Zud
Oakite No. 33 Dilac, Texo NY, Flash-Klenz
Caddy Cleaner, Turco Scale 4368 or
Permag 57
3M Scotch Pad, type A, grade "fine"

Cleaning the Condenser

The condenser (located behind the front grille cover)
should be cleaned every three (3) months. Use a soft
bristle brush and vacuum to remove dust and lint.
CAUTION
CAUTION
loss or mechanical failure.
Cleaning Agent
9
Avoid damaging or crushing
the condenser fins or tubing.
Failure to clean the condenser
could result in temperature
Comments
Apply with sponge or soft cloth
P r o v i d e s b a r r i e r f i l m t o m i n i m i z e
fingerprints. Can be used on all finishes.
Rub the surface with a cloth as directed
on the package.
Apply with a damp sponge or cloth, then
rinse with clear water and wipe dry.
For these household cleaners, rub with
a damp cloth. They may contain chlorine
bleaches so rinse thoroughly after use and
wipe dry.
For these products, rub the surface with
a dry cloth using only a small amount of
cleanser. Rinse with water and dry.
Rub onto surface with a dry cloth
When using these cleaners, apply with a
damp sponge or cloth, rinse thoroughly
and wipe dry.
Swab and soak with a clean cloth. Let
stand for 15 minutes or more according
to directions on package, then rinse and
wipe dry.
Clean off the surface soil using cleaning
methods above. Then rub discolored or
corroded areas lightly with a dry pad.