Cleaning The Condenser - Perlick Signature Series Use And Care Manual

Cleaning Cabinet Interior/Exterior
NEVER use hydrochloric
CAUTION
acid (muriatic acid) on
stainless steel. Do not use abrasive cleansers
or cloths on any interior or exterior surfaces
or removable parts.
Glass panels may be cleaned using any standard
glass cleaner available on the market.
To clean interior and exterior non-metallic surfaces
and removable parts, wash with a mild solution of
soap and lukewarm water with a little baking soda.
Rinse and dry thoroughly. Avoid getting water on
the lights, controllers, fan motors and unfi nished
wood wine rack faces.
Job
Routine cleaning
Fingerprints and smears
Stubborn stains and discolorations
Heat tint or heavy discoloration
Tenacious deposits, rust, discoloration,
industrial atmospheric stains
Rust discoloration or corrosion caused
by cleaning agents containing hydro-
chloric (muriatic) acid or chlorine bleach
Use of property names is intended only to indicate a type of cleaner and does not constitute an endorsement. Omission of any proprietary
cleaner does not imply its inadequacy. All products should be used in strict accordance with instructions on the package.
NOTE: Do not use steel wool or scouring pads to clean stainless steel.
Printed in USA
Recommended Cleaners for Specifi c Situations
Cleaning Agent
Soap, ammonia, detergent
Areal 20, Lac-O-Nu, Lumin Wash,
O-Cedar Cream Polish
AllChem Concentrated Cleaner, Samae,
Twinkle, Cameo Copper Cleaners, Grade
FFF Italian Pumice Whiting, Steel Bright,
Lumin Cleaner, Zud Restoro, Sta-Clean,
Highlite Cooper's Stainless Steel Cleaner
or Revere Stainless Steel Cleaner
Old Dutch, Lighthouse Sunbrite,
Wyandotte Bab-O, gold Dust, Sapollo,
Bon Ami or Comet
Liquid NuSteel or Dubois Temp
Penny-Brite, Copper Brite, Paste
Nu-Steel, Dubois Temp or Tarnite
Bar Keepers Friend, Revere Stainless
Steel Cleaner, Allen Polish, Steel Bright
Wyandotte Bab-O or Zud
Oakite No. 33 Dilac, Texo NY, Flash-
Klenz Caddy Cleaner, Turco Scale 4368
or Permag 57
3M ScotchBrite pad, type A, grade "fi ne" Clean off the surface soil using cleaning

Cleaning the Condenser

The condenser (located behind front grille cover)
should be cleaned every three (3) months. Use
a soft bristle brush and vacuum to remove the
dust and lint.
CAUTION
fi ns or tubing.
Apply with sponge or soft cloth.
Provides barrier fi lm to minimize fi nger-
prints. Can be used on all fi nishes. Rub
the surface with a cloth as directed on
the package.
Apply with a damp sponge or cloth, then
rinse with clear water and wipe dry.
For these household cleaners, rub with
a damp cloth. They may contain chlorine
bleaches so rinse thoroughly after use
and wipe dry.
For these products, rub the surface with
a dry cloth using only a small amount of
cleanser. Rinse with water and dry.
Rub onto surface with a dry cloth.
When using these cleaners, apply with a
damp sponge or cloth, rinse thoroughly
and wipe dry.
Swab and soak with a clean cloth. Let
stand for 15 minutes or more according
to directions on package, then rinse and
wipe dry.
methods above. Then rub discolored or
corroded areas lightly with a dry pad.
8
Use and Care Guide
A v o i d d a m a g i n g o r
crushing the condenser
Comments
0213