Table of Contents
Advertisement
Available languages
Available languages
Maintenance
01
Support clip 1
02
Support clip 2
Support clip 3
03
82 English
NV73J9770RS_EE_DG68-00613D_SV+NO+FI+DA+EN.indb 82
NV73J9770RS_EE_DG68-00613D_SV+NO+FI+DA+EN.indb 82
03
03
02
01
5.
Remove the third sheet from the door in
the arrow direction.
6.
Clean the glass with soapy water and a
clean cloth.
7.
When done, reinsert the sheets as
follows:
• See the picture and locate the hinges.
Insert sheet 3 below support clip 1,
sheet 2 between support clip 1 and 2,
and sheet 1 into support clip 3 in this
order. Make sure the printed side of
sheets is inserted inward.
CAUTION
To identify the correct side of the sheet,
locate the "PYRO" mark on the corner of
every sheet.
Correct direction: PYRO-**-**
Wrong direction:
- * *
- * *
O
R
8.
After insert the sheet 2, press down the
glass clips and check if they secure the
glass sheet properly.
Follow steps 1-2 above in the reverse
9.
order to reinstall the coverings.
WARNING
To prevent heat leaks, make sure you
propery reinsert the glass sheets.
Y
P
2021-06-08 오후 3:38:58
2021-06-08 오후 3:38:58
Advertisement
Chapters
Table of Contents
