Initial (Default) Settings (3) - ABB RELION REB500 Engineering Manual

1MRK 511 452-UUS Rev. A
9.9

Initial (default) settings (3)

Battery voltage
This setting is valid for:


IEC18000835 V1 EN-US
See
Distributed busbar protection REB500
Engineering manual
Aux. DC voltage of BU/CU voltage supply
Aux. DC voltage of BU/CU binary inputs
Section 7.5.
© 2020 Hitachi Power Grids. All rights reserved
General
The default values are valid for the complete protection system.
If the entries are made during the initial setfile configuration phase
(prior to the Bay Model engineering under the window Single-line
diagram), they are valid for the further configuration process.
If the entries are made at a later stage, they have to be confirmed
with Change value of all (group individually) to get a system-wide
validity.
Recovery time
For detailed information, see REB500
Application Manual Breaker reclaim
section
time .
CT (VT) ratio
Secondary values of current and voltage
transformers (If VTs are used for protection
system)
Annex B | Configurator mode - System configuration
GUID-F223C83F-65A7-4B21-ACB2-2B947AFA8005 v2
Section 9
59