1MRK 511 452-UUS Rev. A
9.28
SLD-CONF — Bus labels (2)
ANSI18000854 V1 EN-US
Distributed busbar protection REB500
Engineering manual
Now, the Bus Label is visible.
It is recommended to make all necessary Bus Labels
visible now.
Note: At least one Bus Label should be visible at the end of each zone.
© 2020 Hitachi Power Grids. All rights reserved
Annex B | Configurator mode - System configuration
GUID-3896871F-1800-4693-A547-8F400A37D261 v3
Section 9
77