1MRK 511 452-UUS Rev. A
9.3
Start HMI500
IEC18000829 V1 EN-US
See
Distributed busbar protection REB500
Engineering manual
Section
3.
© 2020 Hitachi Power Grids. All rights reserved
Starting HMI500 Configurator mode
For the setfile configuration, the HMI500 has to be
started under the Configurator mode.
HMI500 Setfile Editor
Under the setfile editor, the complete system
configuration (setfile) can be configured.
Annex B | Configurator mode - System configuration
GUID-D1ECA4E4-F3E6-4AA0-B923-4BA871AAA180 v2
Section 9
53