Sld-Conf - Typical Bays (1) - ABB RELION REB500 Engineering Manual

1MRK 511 452-UUS Rev. A
9.23 SLD-CONF — typical bays (1)
ANSI18000849 V1 EN-US
Distributed busbar protection REB500
Engineering manual
Configuration steps from Configuration steps from
 
8.14 SLD-CONF → Select BM (1) 8.14 SLD-CONF → Select BM (1)
to to
8.22 SLD-CONF → Export BM (3) 8.22 SLD-CONF → Export BM (3)
are ready are ready
Repeat the configuration Repeat the configuration
steps done for the typical line steps done for the typical line
feeder My line 380kV for each feeder My line 380kV for each
typical bay of the station. typical bay of the station.
Typical bays of this station Typical bays of this station
are: are:
• • Line 380 kV Line 380 kV
• • Trafo 380 kV Trafo 380 kV
• • Buscoupler 380kV Buscoupler 380kV
• • Line 380 kV including Line 380 kV including
section Disconnector section Disconnector
© 2020 Hitachi Power Grids. All rights reserved
Annex B | Configurator mode - System configuration
GUID-5E5C0425-6D0F-4B68-9131-D7C59100A6FE v3
Section 9
73