Sld-Conf - Adjust Bm (1) - ABB RELION REB500 Engineering Manual

Section 9
Annex B | Configurator mode - System configuration
9.18 SLD-CONF — adjust BM (1)
Menu Configuration-Device structure (hardware object)
Menu Configuration-Binary module (I/O signals/ configuration)
ANSI18000844 V1 EN-US
68
Menu Configuration-LMI LED configuration
Menu Configuration-Disturbance recorder
© 2020 Hitachi Power Grids. All rights reserved
Note: While inserting the Bay Figure into the
single-line diagram, the HMI500 tool has
implemented the complete Bay Model under the
related Menus automatically.
Setting menus of the protection
functions and switchgear objects.
1MRK 511 452-UUS Rev. A
GUID-D92282C9-E7D9-478D-9191-342D7ED33C47 v3
Distributed busbar protection REB500
Engineering manual