Sld-Conf - Bus Labels (1) - ABB RELION REB500 Engineering Manual

Section 9
Annex B | Configurator mode - System configuration
9.27 SLD-CONF — Bus labels (1)
ANSI18000853 V1 EN-US
76
After all Bay models have been imported to
the SLD, the busbar labels shall be made
visible.
(1) Select a Busbar Connector
After a left mouse click the
connector point is highlighted in
red colour.
(2) Make labels visible
Now, the button Bus label visible
shall be pressed.
© 2020 Hitachi Power Grids. All rights reserved
1MRK 511 452-UUS Rev. A
GUID-DF3E5306-8B79-4EAF-961D-1AA1A873B56C v3
Distributed busbar protection REB500
Engineering manual