Communication (1) - ABB RELION REB500 Engineering Manual

1MRK 511 452-UUS Rev. A
9.11

Communication (1)

IEC18000837 V1 EN-US
Distributed busbar protection REB500
Engineering manual
© 2020 Hitachi Power Grids. All rights reserved
Annex B | Configurator mode - System configuration
GUID-F9ADBAE8-3820-4A19-B648-55A1296E46D7 v2
SCS Configuration
The default setting is no interface. Under th
setting, no protocol specific settings are
visible.
If an inter-bay bus (IBB) is selected, the
particular protocol specific settings are
visible.
Max. two IBB configurations (connections) c
be realized per system.
 IBB1/ IBB2
For detailed information about IBB
settings, see REB500 Communication
Protocol manuals
.
Section 9
61