Sld-Conf - Bus Zone Assignment (3) - ABB RELION REB500 Engineering Manual

Section 9
Annex B | Configurator mode - System configuration
9.33 SLD-CONF — Bus zone assignment (3)
Warning: If the bus zones reassignment process is started with the button "Reassign Buszones", the configurator
tool also performs the reassignment of the bus zone related signals (I/Os) in the background. The reconfiguration
of a complex system (setfile) can induce a changed signal configuration compared to the original setfile. These (bus
zone related) signals have to be worked over under the binary module configuration of the central unit (CU) now.
ANSI18000859 V1 EN-US
82
Reassign Buszones
Press button Reassign Buszone only
if the assignment made by the
system is incomplete.
© 2020 Hitachi Power Grids. All rights reserved
1MRK 511 452-UUS Rev. A
GUID-84006325-F3A6-4ACB-8AF6-13E84E6702AD v3
Distributed busbar protection REB500
Engineering manual