Table of Contents
Advertisement
Installation
6.3
Controllers
If the vehicle is equipped with two-handed grip, it
means that the operator must use both hands to be
able to operate the loading platform, while it protects
the operator from pinch and crush injuries.
1. Fit the controllers in the desired locations. They
must be positioned so that the operator is in the
safest possible location with a clear view of the
load, tail lift and surrounding area.
2. The distance between the rear edge of the
vehicle and the centre of the controllers must be
betwen 300-600 mm. See Image 20.
NOTE.
All cable inlets must be pointing downwards.
3. The controller cable connects to the control card.
See section "8.6 Connecting controllers" on page
40.
WARNING!
A controller must always be fitted on the side that is
facing away from traffic in motion. Therefore, if there is
a need for a controller on the opposite side, a further
controller must be fitted. Fitting any other way involves
increased risk of injury.
20
300 - 600 mm
Image 21. Installing controllers
Image 20. Installing controllers
Z 10/15/20
www.zepro.com
Hide quick links:
Advertisement
Table of Contents
