Dynamic Load Test - Zepro Z 10 Installation Instructions Manual

Testing and verification
11.2

Dynamic load test.

11.2.1 Test with max. load
• Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
• Check that the lift operates correctly in the normal range of movement, i.e. up, down, tilting at ground
level and tilting at vehicle floor level.
11.2.2 Test with overload
• Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
• The test load should be 1.25 x max. load for each lift model. Verify that the tail lift cannot lift the load
when the up function is switched on (it may however be possible to tilt up the load).
11.2.3 Dynamic load (Test load 1.0 x tail lift loading capacity).
For tail lifts with load centre of 600 mm.
Capacity Load 500 kg
Distance on platform (L)
450 kg 600 mm
500 kg 600 mm
700 kg 800 mm
750 kg 900 mm
1000 kg 1200 mm
1500 kg 1800 mm
2000 kg
2500 kg
1.1.1 Dynamic load (Test load 1.0 x tail lift loading capacity).
For tail lifts with load centre of 750 mm.
Capacity Load 1500 kg
Distance on platform (L)
1000 kg 750 mm
1500 kg 1125 mm
2000 kg 1500 mm
2500 kg 1875 mm
www.zepro.com
Load 1000 kg
-
-
-
-
600 mm
900 mm
1200 mm
1500 mm
Load 2000 kg
-
750 mm
1000 mm
1250 mm
Z 10/15/20
49