Table of Contents
Advertisement
SECTION 4
Remove linchpin from pin of the hitch of the first trailer. Remove drawbar pin
and drive tractor away.
4.4 LOADING AND SECURING LOAD
4.4.1 GENERAL INFORMATION CONCERNING LOAD
Before beginning loading make certain that the tailgate and chute slide gate are properly
closed and secured. The trailer must be positioned to travel forwards and be hitched to the
tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor. If the trailer is equipped with tarpaulin cover, it should be rolled.
IMPORTANT!
When a tailgate is tightly closed, that securing hooks must fully engage the rear gate
securing pin.
Regardless of the type of load carried, the user is obliged to secure it in such a manner that
the load is unable to spread and cause contamination of the road. If this is impossible, do
NOT transport this type of load.
Materials, which in contact with painted or steel surfaces may cause damage, should be
transported in sealed packaging (sacks, boxes, barrels etc.), and after completing transport,
thoroughly wash out load box with water jet.
If the transported materials exert high local pressure on the load box platform it should be
protected against damage using thick planks, plywood or other materials of similar properties.
IMPORTANT!
Always aim at distributing the load uniformly in the load box.
Do NOT exceed the trailer's maximum carrying capacity.
Due to the various density of materials, using the total load box capacity may cause
exceeding permissible carrying capacity of the trailer. Guideline specific weight of selected
If the trailer is fitted with automatic rear hitch, lift the pin by the handle
(3) - figure (4.2)
4.11
Pronar T669
Advertisement
Table of Contents
