Loading And Load Securing - PRONAR T679/4M User Manual

Rules of use

4.4 LOADING AND LOAD SECURING

The trailer is designed for transporting and
unloading heavy materials such as debris,
stones, crushed stone, gravel used during
construction works, earthworks and dem-
olition works. Transport can take place
either within the farm or on public roads.
Before loading, the trailer must be placed
CAUTION
Manure spreader overloading, inefficient loading and
securing of loads are the most common causes of
accidents during transport.
Keep a safe distance from overhead power lines dur-
ing operation.
When loading or unloading, bystanders must be
careful and keep a safe distance from hazardous
areas.
for driving straight ahead on level ground
and connected to the tractor. Before
loading, make sure the tailgate is properly
closed and secured.
The technical condition of hydraulic
and pneumatic systems should also be
checked, especially the tightness of the
brake cylinders. Loading and driving
a trailer with damaged rear cover system,
braking system or hydraulic tipping system
is prohibited. Keep a safe distance during
loading and unloading. Keep bystanders
away from the work area of trailer.
The load should be evenly distributed over
the length and width of the box to ensure
the correct distribution of axle load and
the proper stability of the trailer. The load
cannot protrude beyond the outline of the
load box. The permissible height specified
in road traffic regulations and the permis-
sible structural capacity of the trailer may
not be exceeded.
Due different density of materials, the
use of the total capacity of the load box
may exceed the allowable capacity of the
trailer. Approximate specific weight of se-
lected materials is presented in Table 4.1.
Therefore, pay special attention not to
overload the trailer.
Loading should be performed by a person
with appropriate authorization to operate
the equipment (if required).
CAUTION
The trailer's maximum carrying capacity must not be
exceeded.
The load on the loading platform must be evenly dis-
tributed and properly secured.
During travel on public roads, the tailgate must be
closed.
The load must be arranged in such a way that it does
not threaten the stability of the trailer and does not
hinder driving.
Transported machines must be secured against
movement by means of suitable and good condition
belts, using transport handles.
PRONAR T679/4M
Chapter 4
4.9