Adjustment Of Drawbar Position - PRONAR T669 Operator's Manual

SECTION 5
DANGER
Assembly and disassembly of the frame should be carried out with the use of appropriate
platforms, ladders or when standing on a ramp. These tools must be in good condition to
fully protect the persons working on them against falling. Work should be performed by at
least two persons. Exercise particular caution.

5.13 ADJUSTMENT OF DRAWBAR POSITION

Location of trailer drawbar depends on the type of farm tractor hitch. If possible, we
recommend adjusting the tractor hitch so that the trailer drawbar is positioned horizontally
while driving on a flat terrain.
To adjust drawbar position change the position of bolted drawbar eye (1) on the faceplate (2)
- Figure (5.16).
FIG. 5.16 Adjustment of drawbar position
(1) fixed drawbar eye, (2) faceplate, (3) fixing bolt
5.41
Pronar T669