SECTION 5
Required service actions
Reduce pressure in supply conduit.
Remove securing slide (1) – figure (5.8).
The insert and the filter body should be carefully washed out and blown
through with compressed air. Assembly should be done in reverse order.
Cleaning the air filter (filters):
5.3.4 DRAINING WATER FROM AIR TANK
FIG. 5.9
Draining water from air tank
(1) drain valve, (2) air tank
Reduction of pressuring conduit may be achieved by pressing the
head of the pneumatic connection to resistance point.
Hold the filter cover (2) with the other hand. After removing slide lock,
the cover is pushed off by the spring, in the filter housing.
• every 3 months of use,
5.19
Pronar T669