Installation And Disassembly Of Extension Walls - PRONAR T669 Operator's Manual

SECTION 5
5.11 INSTALLATION AND DISASSEMBLY OF EXTENSION
WALLS
Extension mounting
Install six wall extension supports (8) on the rear and lateral load box stakes
and the lateral tailgate stakes.
Install front wall extension (1).
Install two front lateral wall extensions (3).
Install lateral stakes (5).
Install two rear lateral wall extensions (4).
Attach lateral wall extensions (3) and (4) to the lateral stakes (5).
Install the rear stakes (6).
Attach rear lateral wall extensions (4) to the stakes (6).
Install tailgate extension (2).
On both sides Install the rear profiles of wall extensions (7) and screw them to
tailgate extension (2).
Brace the structure by installing tension rod (10) on both sides of the load box.
Attach tie beam (9) to the lateral stakes (5).
All wall extension arms must be bolted load box brackets.
Attach the ladder to the front wall extension (1).
Disassembly of wall extensions should be performed in reverse order.
Holes in wall extension stakes must align with holes in the supports.
Wall extension arms must be inserted into the appropriate mounting
brackets welded to the load box.
Lateral wall extensions must be screwed to the front wall extension.
Tension rod (10) must be screwed to the tailgate wing and rear wall
extension profile (7).
5.37
Pronar T669