Table of Contents
Advertisement
Pronar T669
Check tightness of connections in accordance with Chapter (5.3.2).
FIG. 5.10
Installation of the pneumatic conduit
(1) pneumatic conduit, (2) connecting nut (3) clamping ring, (4) reinforcing sleeve
5.4 HYDRAULIC SYSTEM OPERATION
5.4.1 PRELIMINARY INFORMATION
Work connected with the repair, change or regeneration of hydraulic system components
(suspension cylinders, valves etc.) should be entrusted to specialist establishments, having
the appropriate technology and qualifications for this type of work.
The duties of the operator connected with the hydraulic system include:
The ends of the pneumatic conduit (1) must be cut exactly at right
angles.
Clamping ring (3) should be fitted according to figure (5.10).
Reinforcing sleeve (4) of the conduit must be thoroughly depressed.
5.22
SECTION 5
Advertisement
Table of Contents
