Download Print this page

Delta Frameless Sliding Installation Manual page 3

Contemporary style shower and bathtub doors
Hide thumbs Also See for Frameless Sliding:

Advertisement

CAUTION:
• Tempered safety glass is stronger than normal glass but is not unbreakable. A scratch to the glass or contact with a hard surface (such as a screw
head or tile/concrete floor) can cause it to break or weaken. This could, immediately or even at a later time, cause the glass panel to shatter into many
small pieces without apparent cause. When it does break, it loudly explodes into thousands of smaller pieces (the smaller pieces reduce the risk of
personal injury).
To reduce the risk of personal injury or glass breakage:
• During installation tempered glass should not come in direct contact with metal parts or hard surfaces (such as tile/concrete flooring) or it may shatter.
Gaskets and bushings must always be used between glass and metal.
• DO NOT touch the edges of tempered glass with tools. DO NOT attempt to cut tempered glass or it will shatter.
• Keep the corner protectors on the glass during unpacking and installation. DO NOT remove them until after the glass panels are installed unless
instructed otherwise.
• Once installed, glass panels must be clear of all shower environment obstructions. Ensure appropriate clearances exist before beginning the installation
process.
• All components must be installed as instructed with particular attention to Grab Bumpers, Blade Seals, Bumper Seals, Glazing Components, Gaskets
and Bushings.
Corner
Protectors
Protectores
de Esquinas
NOTE:
• Consider using assistance from another capable person when installing this shower door system.
• Shower opening dimensions:
"
– 60" Tub/shower: 50-1/8
minimum – 58-1/2
• Cover tub or shower drain with rag or tape to avoid loss of small parts.
• Follow the silicone sealant manufacturer's instructions for application and curing time.
• Installation video available at www.deltafaucet.com.
• Limited 5 Year Warranty, conditions may apply - See www.libertyhardware.com/warranty for additional details or call Liberty Hardware's Customer Care at
1-800-964-4850.
For regular cleaning use ONLY mild detergents or warm, soapy water. Use ONLY non-abrasive cloth or sponge. ALWAYS rinse surfaces after cleaning.
Before cleaning this product with cleaning products, test a small, inconspicuous area.
For optimal maintenance it is recommended that the glass panels be squeegeed on a regular basis after the shower is used.
IMPORTANT: Manufacturer does not recommend the use of cleaning products that contain any of the following chemicals. Use of
products containing these chemicals can cause the products to discolor and will void the warranty.
• Naphtha
• Hydrogen Peroxide Solution (common household peroxide)
• Toluene
• Ethyl Acetate
• Lye (common in drain cleaner)
• Acetone
For further inquiries, contact customer service at customersolutions@deltashowerdoors.com or call Liberty Hardware's Customer Care at 1-800-964-4850.
BEFORE YOU START
BEFORE BEGINNING YOUR INSTALLATION, fully
inspect the edges and corners of your glass panels
for any nicks, chips or scratches which might have
occurred during the transportation of your glass
panels. If you see any wear or damage to your glass
panels call Liberty Hardware's Customer Care to
receive a replacement panel at 1-800-964-4850.
Installing glass panels with any nicks, chips or scratches
may result in personal injury, property damage, or
product failure.
La instalación de los paneles de vidrio con mellas, astillas
o rayones puede provocar lesiones, daños a la propiedad
o fallas del producto.
"
maximum. – 48" Shower: 43-3/8
CARE AND CLEANING
CAUTION
PRECAUCIÓN
"
"
minimum – 47-3/8
maximum.
3

Advertisement

loading