Table of Contents
Advertisement
Model/Modelo/Modèle
3564-MPU-DST
Series/Series/Seria
ASHLYN
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely before
beginning.
• To READ ALL warnings, care, and
Maintenance information.
Para instalación fácil de su llave
Delta usted necesitará:
• LEER TODAS las instrucciones
completamente antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi
que toutes les instructions de nettoyage
et d'entretien;
www.deltafaucet.com
77310
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
1
TWO HANDLE WIDESPREAD
LAVATORY FAUCETS WITH
EZ ANCHOR
®
EXTENSIÓN DE DOS MANIJAS
LLAVES DE LAVAMANOS CON
INSTALACIÓN DEL EZ ANCHOR
DEUX POIGNÉE RÉPANDUE
ROBINETS DE LAVABO AVEC
EZ ANCHOR
®
3/32" (2.38mm)
3/32 po
3/32" (2.38mm)
3/32 po
®
13/64" (5mm)
13/64 po
5/30/17
Rev. G
Advertisement
Table of Contents
Related Manuals for Delta ASHLYN Series
Summary of Contents for Delta ASHLYN Series
- Page 1 Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) 3/32 po 13/64” (5mm) 13/64 po For easy installation of your Delta faucet you will need: • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information.
- Page 2 Top View / Vista superior / Vue de dessus Place black valve anchors (1) into the IMPORTANT: Align valve anchors (1) Place grey spout anchor (1) into the center outermost left and right sink holes. and spout anchor (2) by placing lift sink hole.
- Page 3 Correct End Valve Orientation La Orientación de la Válvula Extrema Bonne configuration de la soupape Hot/Caliente/Chaude Cold/Fría/Froide Top View of Anchors / Vista superior / Vue de dessus Open Abrir Ouvert Valves shown in closed position. Las válvulas en la posición cerrada. Soupapes montrées en position fermée.
- Page 4 Place handle bases (1) over anchors and onto basin surface. Make Place spout base (1) over spout anchor and onto basin surface. Make sure tabs (2) are firmly pressed down into anchor slots (3). Slide sure tabs (2) are firmly pressed down into slots (3). handles over valve stem and secure with set screw.
- Page 5 Top View Vista superior Vue de dessus Front Frente Avant Top View Vista superior Vue de dessus Front Frente Avant Feed spout tube (1) through indicated Spout tube (1) should be inserted completely Insert the large hex wrench (1) into lift rod hole (2) in the anchor, continuing through the through anchor assembly (2) as shown.
- Page 6 Delta is not responsible for tubing that is cut too short or cut in a the line on the tube. Bend outlet tubes (3) and insert into outlet connector to way that will not allow for a leak-free joint.
- Page 7 — Tubing is cut too short: buy a coupling union and a to supply valve connection (4) and hand be created. Delta is not responsible for tubing that is cut too replacement supply line that mate together from a store.
- Page 8 Custom Fit Connections - Plastic Sleeve (Ferrule) Installation Instructions Conexiones Especiales - Instrucciones para la Instalación del la Manga Plástico (Casquillo) Branchements Spéciaux - Instructions d’installations de le manchon en plastique (Bague) Correct method Incorrect Installation Método Correcto Instalación Incorrecta Bonne méthode Installation Incorrecte Do not install plastic...
- Page 9 Metal Pop-Up Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal Remove stopper (1) and flange (2). body (2) into sink. Screw flange (1) into body (2). rod (2) and stopper (3) as removable (4) or non-removable (5).
- Page 10 To Change the Position of Handle Stop (5). Para cambiar la posición de el tope (5). Pour changer la position de la butée (5). Cold Caliente Fría Chaude Froide La flecha va hacia el surtidor en lados Arrow faces calientes y fríos. spout on both hot &...
- Page 11 RP49146p Lift Rod RP72131p RP77421p Barra de alzar Decorative Supply Line Covers RP77421-1.2p Tige de manoeuvre (PVC) Spout Assembly Quantity 2, 30" Long RP60352 Ensamble detubo de salida Available as Accessory Order Bonnet Nuts RP60400 (Not Included) Bonetes Valve Assembly Chapeaux filetés Tapas decorativas para las líneas Ensamble de la...
- Page 12 DELTA FAUCET COMPANY NO SE HACE RESPONSABLE POR CUALQUIER DAÑO ESPECIAL, uso y servicio normal. Si la reparación o su reemplazo no es práctico, Delta Faucet Company tiene INCIDENTAL O CONSECUENTE (INCLUYENDO LOS GASTOS DE MANO DE OBRA) POR EL la opción de reembolsarle su dinero por la cantidad del precio de compra a cambio de la devolución...
Need help?
Do you have a question about the ASHLYN Series and is the answer not in the manual?
Questions and answers
There is an excessive amount of play in the hot water handle. It shuts off and on just fine, but there was a lot of slop in it. I tried to tighten the set screw that does not work. I remove this that screw and try to take the handle off, but it will not come if I try to pry it up with a screwdriver. Will I do any damage to the cartridge?
To fix excessive play in the hot water handle of a Delta ASHLYN Series faucet without damaging the cartridge:
1. Close the hot and cold water supply valves.
2. Remove the handle and inspect the internal components.
3. Check the DST cartridge and ensure it is properly aligned and fully seated.
4. Use a wrench to tighten the bonnet nut (tuerca tapa) securely without over-tightening.
5. Reinstall the handle and test for play.
6. If play persists, consider replacing the cartridge with a new one, ensuring it is installed with the arrow pointing toward the spout.
Avoid using pipe dope or metal ferrules, and do not overtighten to prevent cartridge damage.
This answer is automatically generated