Checking Performance Problems - VERITAS Simone Instruction Manual

4. CHECKING PERFORMANCE PROBLEMS

PROBLEM
Incorrect Thread Tension(s).
Incorrect size Needle.
Irregular Stitches
Improper Threading.
Pulling Fabric.
Loose Presser Foot.
Pulling fabric.
Incorrect size Needle.
Breaking Needle
Incorrect setting of Needle.
Loose Presser Foot.
Incorrect Thread Tension(s).
Puckering Bent or blunt Needle.
Differential feed is set incorrectly.
Differential feed is set incorrectly.
Wavering
Incorrect size Needle.
Improper Threading.
Skipping Stitches
Bent or blunt Needle.
Incorrect setting of Needle.
Improper Threading.
Bent needle.
Thread Tension(s) too tight.
Breaking Threads Incorrect setting of Needle.
Thread Spool tangled.
Thread Guide Pole not extended.
PROBABLE CAUSE CORRECTION
Reset Thread Tension(s).
Choose correct size Needle for
Thread and Fabric.
Re-thread Machine.
Do not pull Fabric; guide it gently.
Reset Presser Foot.
Do not pull Fabric; guide it gently.
Choose correct size Needle for
Thread and Fabric.
Reset Needle.
Reset Presser Foot.
Reset Thread Tension(s).
Insert new Needle.
Set it at less than 1.
Set it at 1 or at more than 1.
for knitted fabrics.
Re-thread Machine.
Choose correct size Needle for
Thread and Fabric.
Insert new Needle.
Reset Needle.
Re-thread Machine.
Insert new Needle.
Reset Thread Tension(s).
Reset Needle.
Reset Spool properly.
Fully extend Guide Pole.
87