Powering Up The 980 - Quantum Data 980 User Manual

980 User Guide – MHL Compliance Tests
3. Select the installation folder. We recommend installation in the default folder.
4. After installation completes, run the new 980 Manager. It should be available in the Start Menu under All
Programs → Quantum Data, and also from an icon on your Desktop.
5. Verify that the version number in the title bar matches the version on the Quantum Data website Downloads
page www.quantumdata.com/downloads.
2.4

Powering up the 980

Use the following procedures to power up the 980 Protocol Analyzer.
1. If necessary, apply power by toggling the rocker type power switch on the back of the 980.
Page 8
Rev. B29
July 26, 2011