Advertisement
Window
frame.
76.
To reduce possible water from penetrating
into the window cavity, caulk gap on both sides
of window opening prior to installing Window
Insert. Position insert in cavity and screw with
6 - 1 1/4" Screws. On sides, make sure to
screw insert into the thick butt of the siding only.
78.
Position Window Trim around window doing a dry run first and attach with
4 - 1 1/2" Finishing Nails per piece. Window trim has a small dado on reverse
face. Outside flange of window will roughly sit in the dado to give a better fit.
Window Trim Package x 1
(Top - 24 1/16" Long - Angle Cut Ends) x 1
(Sides & Bottom - 23" Long) x 3
Toll Free 1-888-658-1658
Caulk
gap.
Trim dado sits
in flange.
Parts
www.outdoorlivingtoday.com
Screw insert into
bottom (thick)
part of siding.
Parts
Window Insert x 1
Hardware
S2 - 1 1/4" Screws
x 6 total
Caulk
gap.
Hardware
N1 - 1 1/2" Finishing Nails
x 16 total
Page 41
77.
Once Insert is attached,
caulk
the
"triangular
between the Insert's outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet.
additional caulking will also will
reduce the chances of moisture
entering into your shed.
sales@outdoorlivingtoday.com
gap"
This
Advertisement
