Advertisement
Angled Facia caps
Square Cut Facia.
Toll Free 1-888-658-1658
63.
Position Rear Facia (angle cut on ends) and Side Facia
(square cut ends) in corner. Line Facia up so angle cut Facia
caps square cut Facia. Attach angled Facia to Nailing Strip with
8 - 1 1/2" Finishing Nails per piece. Gap where facia boards
come together at peak will be covered in Step 65. Do a dry run
using Side Facia to help you correctly position before attaching.
Front & Rear Facia - Angle Cut Ends
N1 - 1 1/2" Finishing Nails x 64 total
www.outdoorlivingtoday.com
Page 35
62.
Attach Facia Nailing Strips to
the underside edge of the plywood roof.
Align corner of Nailing Strip with edge
of roof plywood. Secure each Strip with
3 - 1 1/4" Screws. Complete all four
pieces, two on each side of the shed.
Parts
Facia Nailing Strips
(3/4" x 2 1/2" x 51") x 4
Hardware
S2 - 1 1/4" Screws x 12 total
Parts (Steps 63 - 64)
(3/4" x 3 1/2" x 58") x 4
Side Facia
(3/4" x 3 1/2" x 71 3/4") x 4
Hardware (Steps 63 - 64)
sales@outdoorlivingtoday.com
Advertisement
