Advertisement
32.
Flip Rafter Section over so Soffit is
facing down. Starting with one side, lift
completed Rafter Section up and place on
gable framing.
33.
Slide Rafter Section up on gable
framing until bottom of Ridge Board slips
into gable notch.
Soffit should sit approx. 1/8"
away from wall panel.
34.
When Rafter Section is correctly positioned, outside rafters will sit equally on gable framing and
Soffit will sit approximately 1/8" away from wall panels.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 22
Rafter should rest
on gable framing.
Gable Notch
sales@outdoorlivingtoday.com
Advertisement
