Advertisement
Do Not Attach Walls To
Floor Until Step 23.
16.
Position a Rear Wall into place on plywood floor. Butt both vertical wall
studs of Side and Rear Walls together and attach with 3 - 2 1/2" Screws.
Screw at the bottom, middle and top of stud to secure properly.
17.
With the corner wall attachment complete, position a second Rear Wall panel in place so bottom
2x3 wall framing is sitting flush with outside floor joists and plywood floor. Wall siding should overhang
floor by approximately 1/2". When positioned correctly, attach both Rear Wall panel studs together as
shown.
Toll Free 1-888-658-1658
Optional - Caulking
seams will help prevent
moisture from entering
your shed.
not included in kit.
www.outdoorlivingtoday.com
Page 13
Caulking
Hardware (Steps 16 -18)
S1 - 2 1/2" Screws
Pilot Hole
first.
sales@outdoorlivingtoday.com
x 18 total
Advertisement
