Advertisement
Notch to front
and on top.
21.
Attach Short Door Headers to Narrow Walls with 2 - 2 1/2" Screws per
piece. Header is 3 1/2" wide at bottom and has a 1/2" thick x 3" wide strip of
wood stapled to the top creating a notch or dado effect. This notch needs to be
positioned on the top facing the front. The notch is necessary to hold the drip
cap that will be installed above the door in Step 55.
Pre-drill to prevent splitting!
Notch to front
and on top.
Toll Free 1-888-658-1658
Pilot Hole
first.
Sits flush with inside
of Wall framing.
Pilot Hole
first.
www.outdoorlivingtoday.com
Page 16
Door Headers - Short
(2" x 3 3/8" x 6 1/2") x 2
S1 - 2 1/2" Screws
22.
Attach Long Door Header to
Vertical Door Jambs and Narrow
Walls with 2 - 2 1/2" Screws per
side. Position the notch on the top
facing the front as per Step 21.
Pre-drill to prevent splitting!
Parts
Door Header - Long
(2" x 3 3/8" x 78") x 1
Hardware
S1 - 2 1/2" Screws
x 4 total
Make sure joints are
tight. Push Walls in
if required.
sales@outdoorlivingtoday.com
Pilot Hole
first.
Parts
Hardware
x 4 total
Advertisement
