Advertisement
38.
Roof Gussets are positioned on mid rafters. Have two helpers push the
Side Walls at the top from the outside of shed until inside to inside measurement
between the Top Plates is 91". Slide Gusset up on side of Rafters. Gusset must
be below top edge of Rafter. Use level to square Gusset and attach to Rafters
with 4 - 2" Screws. Pilot hole each Gusset end with 1/8" drill bit.
40.
Attach all Single and Double Rafter
Brackets where rafters meet Top Wall Plates
inside of shed. Attach with 2 - 1 1/4" Screws
and 2 - 2" Screws per Single Rafter
Bracket and 6 - 2" Screws per Double
Rafter Bracket.
Have two helpers hold the Side Walls at the
top from the outside of shed to keep the
inside-to-inside measurement between the
Top Plates at 91".
Hardware
Y30 - Single Rafter Brackets x 6 total
Y31 - Double Rafter Brackets x 4 total
S2 - 1 1/4" Screws x 12 total
S3 - 2" Screws x 36 total
Toll Free 1-888-658-1658
39.
as per Step 38.
2" Screw
2" Screws
www.outdoorlivingtoday.com
Page 24
Parts (Steps 38 - 39)
(3/4" x 3 1/2" x 72") x 3
Hardware (Steps 38 - 39)
Complete remaining 2 Gussets
1 1/4" Screw
2" Screw
2" Screws
sales@outdoorlivingtoday.com
Roof Gussets
S3 - 2" Screws
x 12 total
1 1/4" Screw
Advertisement
