Advertisement
53.
Trim out Window Wall and Side Solid Walls by
attaching Top Wall Trim. Position with thick end of
Bevel downward at top of wall, tight against Soffits.
Attach with 4 - 1 1/2" Finishing Nails per piece.
Corner Trim
54.
To trim out corners, start with a Corner Trim, align tight
underneath Soffit and Rafter. Align Wide Corner Trim with
bottom of Corner Trim. Corner Trim will cap the Wide Corner
Trim. Do a dry run in each corner before attaching to confirm
positioning. Use 8 - 1 1/2" Finishing Nails per piece to
secure. Complete other front corner the same.
Parts (Steps 54 - 55)
Corner Trim
(1/2" x 3 1/2" x 79") x 4
Wide Corner Trim
(1/2" x 5 1/2" x 82") x 4
Toll Free 1-888-658-1658
Wide Corner
Trim
Hardware (Steps 54 - 55)
N1 - 1 1/2" Finishing Nails
x 64 total
www.outdoorlivingtoday.com
Page 30
Parts
Top Wall Trim (Bevel)
(1/2" x 1 1/2" x 45 1/4") x 6
Hardware
N1 - 1 1/2" Finishing Nails x 24 total
Fit Corner Trim tight
underneath Soffit.
Align bottoms of both corner
trim pieces flush.
sales@outdoorlivingtoday.com
Advertisement
