Advertisement
Toll Free 1-888-658-1658
26.
both ends of the shed. Align framing and wall
siding lap together. Screw center wall framing of
each piece together with 3 - 2 1/2" Screws.
Note: Prior to attaching, try each combination of
Gables for best fit.
www.outdoorlivingtoday.com
Page 18
25.
Next, attach the Side Wall Top Plates.
The Side Wall Top Plates are angle cut
down the length. Once again, position Top
Plates on wall frame so they are flush. Side
Wall Top Plates will fit between Front & Rear
Plates. Attach with 4 - 2" Screws per plate.
Complete all other Side & Front Top Plate
attachments the same.
Locate Triangular Gable Half Walls for
Parts
Triangular Gable Half Walls x 4
Hardware
S1 - 2 1/2" Screws x 6 total
sales@outdoorlivingtoday.com
Male / Female Gable
Siding Overlap.
Advertisement
